Kit Contents; System Requirements - Adaptec ACS-100 User Manual

Kit Contents

Adaptec ACS-100 USB Enclosure
One enclosure stand
One power adapter
One high-quality USB cable
One bag of screws
CD, including device drivers and documentation
A disk drive is not included in the kit. The Adaptec ACS-100 USB
Enclosure supports 3.5-inch IDE hard disk drives.

System Requirements

To successfully install and use your Adaptec ACS-100 USB
Enclosure, your computer must meet these requirements:
®
Microsoft
Windows XP, Windows 2000, Windows Me, or Windows 98SE
Macintosh computers must be running OS 9.2.2 or later for
USB 1.1 support, or OS 10.2.7 or later for USB 2.0 support
Available USB port (see
more information)
CD-ROM drive
About USB 2.0 Performance
Your Adaptec ACS-100 USB Enclosure is a USB 2.0 device. For it to
operate at USB 2.0 speeds, it must be connected to a USB 2.0 port,
and USB 2.0 drivers must be installed on your computer.
If your computer does not have a built-in USB 2.0 port, Adaptec
recommends connecting the USB Enclosure to an Adaptec USB 2.0
adapter for the highest-quality USB 2.0 connection.
®
Windows computers must be running
About USB 2.0 Performance
5
below for