Liquiflo H Series Installation, Operation & Maintenance Manual page 5

Liquiflo Installation, Operation & Maintenance Manual
Table 2: Absolute Temperature & Pressure Ratings
Pump
Series
H1F, H3F, H5R & H5F
H-Series
H7N, H7R, H7F, H9R & H9F
31F, 33F, 35R & 35F
3-Series
37R, 37F, 39R, 39F & 311F
NOTES:
1 The actual maximum surface temperature depends not on the pump but primarily on the temperature of the
fluid being pumped. Temperature class can be controlled with the use of thermal sensors. Pump surfaces will
be approximately 20 °F (7 °C) above the temperature of the fluid being pumped.
Pump is designed to operate within the ambient temperature range of -4 °F (-20 °C) and 104 °F (40 °C).
2
3 For pumps with ANSI 150# RF Flanges, the Maximum Operating Pressure Rating of the flange is 285 PSIG
within the temperature range of -20 to 100 °F. Above 100 °F, derate by 0.29 PSIG/°F.
Table 3: Maximum Torque Specifications (in-lbs)
H-Series
Parameter
3-Series
Idler Gear Teflon
Idler Gear Carbon
Idler Gear Celcon/Delrin
Idler Gear PEEK
Idler Gear Ryton
Double Metal Gears
MCS
MCU
Magnetic Coupling MCA
Size
MCB
MCC
MCV
Table 4: Weight Data
H-Series H1F
Parameter
3-Series
Pump Weight *
*
Weight of pump with threaded ports, excluding motor.
Pump
Models
Temperature
UNITS: °F
-40
-40
-40
-40
H1F H3F H5R
31F 33F 35R
─
4 7
3 9 15
4 11 19
4 12 20
4 12 20
23 23 74
33
─ ─
─ ─
H3F H5R H5F
31F 33F 35R 35F
31 31 32 32
14 14 15 15
MAG-DRIVE Gear Pumps
Models H1-H9, 31-39 & 311 - MC
Minimum Maximum
Operating Operating
Temperature
°C °F
-40 500
-40 500
-40 500
-40 500
H5F H7N H7R
35F 37R
10 14 22
21 28 45
26 36 57
28 38 61
28 38 61
74 134 189
─ ─
75
66
120
240
200
H7N H7R H7F
37R 37F
36 36 36
16 16 16
5
Maximum
Operating
(1)
Pressure
°C PSIG bar (g)
260 300 20.7
260 225 15.5
260 300 20.7
260 225 15.5
H7F H9R H9F
37F 39R 39F 311F
27 38 54
56 79 113
71 99 142
76 107 153
76 107 153
189 189 189
─ ─ ─
─
─
H9R H9F
Unit
39R 39F 311F
38 40 40 lbs
17 18 18 kg
(3)
54
113
142
153
153
189
─
─
─