Liquiflo H Series Installation, Operation & Maintenance Manual page 45

Liquiflo Installation, Operation & Maintenance Manual
Appendix 6: Reference Drawings (Continued)
Dimensional Drawing #1 – Mag-Drive Pump with
Motor
Dimensional Drawing #2 – Mag-Drive Pump with
Motor
* See dimensional data from motor manufacturer for "C" Dimension.
Dimensional Data – Mag-Drive Pump, Close-Coupled
Pump
Models
H-Series 3-Series
H1F/H3F 31F/33F
H5R/H5F 35R/35F
H7N/H7R 37R
H7F 37F
H9R 39R
H9F 39F/311F
1 Threaded ports are NPT or BSPT.
2 Flanges are ANSI 150# RF or DIN PN16.
3 Length (L) is measured from C-face of bracket to end of pump's rear housing. Add 0.31 inches if pump has Bearing Flush
Plugs installed.
Bracket
Bracket
Port Size, Flanged
Port Size,
1 (P)
Threaded
(P) ANSI
in in
1/4 1/2
1/2 1/2
3/4 3/4
3/4 3/4
1 1
1 ¼ 1 ¼
MAG-DRIVE Gear Pumps
Models H1-H9, 31-39 & 311 - MC
Threaded
Flanged
2
Port-to-Port,
Threaded
DIN (PP)
mm in
10 2.68
15 2.44
20 3.32
20 3.32
25 3.50
32 4.00
45
Ports, Close-Coupled
Ports, Close-Coupled
Base-to- Hole-to-
3
Length Port CL Port CL
(L) (BP) (HP)
in in
9.31 4.50 3.06
9.81 4.50 3.31
10.72 4.75 3.75
10.98 4.75 3.88
11.47 4.75 4.12
12.22 4.75 4.50
in