Annunciator Modules - Honeywell Notifier AFP-3030 Manual

Annunciator Modules

ACM-16AT, ACM-32A,
LDM-32 & LDM-R32
General
The Notifier ACS Series Annunciators
provide a modular line of products for
annunciation and control.
ACM-16AT
These may be used for isolate/de-isolate
functions or as test switches for solenoids
or any switchable devices.
Features
• Communications and Communications
Fail LED indication.
• Lamp test button.
• 16 touch pad switches.
• Switches may be set in banks of 8 to
either "toggle on/toggle off" or
momentary modes.
• 16 red and 16 yellow LED's.
ACM-32A
This module may be programmed to show
the status of any point, zone or module on
the system.
Features
• Communications and Communications
Fail LED indication.
• Lamp test button.
• 32 red LED's.
Intelligent/Addressable Devices
ACM-16AT
ACM-32A
Page 1 of 2 DOC-02-034