Options; Optional Show Control Remote Operations; Show Control Remote Led Indicator; Show Control Operation - Ultratec 9D Operator's Manual

Options

Remotes - The Show Control Remote and Timer/ Duration Remote are compatible with the Power Fog
Industrial,Power Fog Industrial w/ Air Option, Power Fog Industrial 9D and Power Fog Industrial
9D w/ Air Option. Each remote is sold separately.
Jug Holder - The Power Fog Industrial 9D and Power Fog Industrial 9D w/ Air Option has
been designed to be versatile in any setting. For ease of operation, a jug
holder may be used to secure the fluid to the machine in the vertical orientation.
The Jug Holder is sold separately.
4" Hose Adapter - If your intention is to connect a 4" hose to the machine and direct the
fog elsewhere, a 4" Hose Adapter (CXP 1046) is available.
This adapter is compatible with the Power Fog Industrial,
Power Fog Industrial w/ Air Option, Power Fog Industrial 9D and Power
Fog Industrial 9D w/ Air Option.

Optional Show Control Remote Operations

The Show Control Remote Handset LED was designed to indicate operation modes.
These are as follows:
Slow Flashing Light: Indicates unit is not ready to operate but still in
Quick Flashing Light: Indicates unit is ready to operate but still in heating
Solid Light: Indicates that the unit is ready to fog at full output.
Triple Pattern Flashing Light: Indicates that the unit is in an
No Light: Indicates problems; a loss of power or remote is not connected.
If these fail to correct the problem, contact your local
Ultratec Special Effects dealer.

Show Control Operation

Show control is achieved by connecting a "Dry" or zero voltage contact to the show
control terminals. The Power Fog Industrial/9D requires no power to signal the fog, only one
set of contacts that close for the entire fogging cue.
For Show Control Operation, the DMX Address must be set on 555.
Closing the Show Control Remote terminals with dry contacts, triggers the following machine
functions:
heating mode, fog is not available at this point.
mode, some fog is available at this point.
over temperature condition and
has shut down.
C + 1 = Fog On/ Off w/ Variflow
C + 2 = ECLIPSE On
C + 3 = Air Option
DRY CONTACTS
C 1 2 3
Fog
OFF
VARIFLOW
OFF/ON
SMOKE
www.ultratecfx.com
Contacts
Variflow
LED
ON
4