HOLT ADK-2130mPCIe Technical Manual page 4

Introduction
The Holt full size F2 Mini PCIe card reference design features one or two Holt HI-2130 MIL-STD 1553
multi-channel terminals with integrated transformers on a single Mini PCIe card. The card is designed to
operate in a PC or single board computer with a Linux OS (note: Windows support will be available in the
near future). The Demo software uses the Holt API Library functions, providing an abstraction layer that
greatly simplifies host programming. This Technical Manual covers the hardware, software and
instructions for how to transfer the Holt Flash Drive (FD) files to the user's PC. See the Quick Start Guide
(QSG) for an introduction to the card, Application Development Kit (ADK) contents and how to run the
demonstration software using the Holt bootable Flash Drive. Use the instructions in this guide to install
the Holt software and Eclipse IDE tool used for software development on to a user's PC. Use the
instructions in the QSG when booting from the Holt USB FD. See technical guide AN-PCIeFPGA for the
FPGA design.
Features

Mini PCIe F2 full size, PCIe gen2 single lane

Single Channel ADK-2130mPCIe-1F or Dual channel ADK-2130mPCIe-2F

Mini Card Electromechanical Specification Rev. 1.2

Independent two dual-redundant MIL-STD 1553 channels using proven HI-2130's

Each Channel with BC, Dual RT and MT

Transformer coupled MIL-STD 1553 interface

Holt API Library support

Linux OS

Operating temperature -40° to +85°

Customizable FPGA

Demo software for BC, RT, RT2 and MT
Figure 1 – Mini PCIe card EV-2130mPCIe-2F
Holt Integrated Circuits
4