HOLT ADK-2130mPCIe Technical Manual page 15

Demos
Execute the Demo program by executing the 'run' script in the Holt folder. The QSG provides
instructions how to execute the 'run' script and run most of the demos.
The run script contains eight terminal commands.
cd PcieDual2130Eclipse/pcie_kernel_module
sudo sh holt_pcie_unload
sudo sh holt_pcie_load
cd ..
cd Demo
cd Debug
ls
sudo ./Demo
holt@holt-desktop:~/holt$ sh run
06:00.0 Memory controller: Xilinx Corporation Device 7011
[sudo] password for holt:
Holt Linux driver unloaded
Holt Linux driver loaded
1553LibrarySrc_linkedfolder
objects.mk
Setting nMR chan 0 LOW Setting nMR chan 0 HIGH READY asserted
Setting nMR chan 1 LOW Setting nMR chan 1 HIGH READY asserted
Number of Devices found: 2
Initial default RT addresses:
DEV0:RT1=3 DEV0:RT2=1
Optionally use console command '9' to change these RT addresses
BEFORE RUNNING RT
*************************************************
Holt Integrated Circuits
Mini PCIe Dual HI-2130 API Demo
Demo Rev: 1.0
API Lib Rev: 03-5-0
*************************************************
BC On
Press 'a' or 'A' to run Dev0 or Dev1 BC Async demo.
Press 'b' or 'B' to run Dev0 or Dev1 RT demo.
Press 'c' or 'C' to run Dev0 or Dev1 RT2 demo.
Press 'k' or 'K' to Enable Dev0 or Dev1 RTMT.
Press 'l' or 'L' to send high priority BC message.
Press 'h' or 'H' to send low priority BC message.
Press 'n' or 'N' to run Dev0 or Dev1 BC Major Minor Frame demo.
Press 'x' or 'X' to stop Dev0 or Dev1 BC transmissions.
Press 'S' to run SMT demo.
Press 't' to display RT Traffic Toggle.
sources.mk
DEV1:RT1=3
Compiled: Dec 11 2019 08:41:16
SMT On RT1 On
Holt Integrated Circuits
Demo _HI-613x_LINUX_DEMO makefile
DEV1:RT1
RT2 On
15