Powering On And Off - Winmate Porty G4 Quick Start Manual

Ultra-rugged tablet
Table of Contents

Advertisement

16
Porty G4 Ultra-Rugged Tablet Quick Start Guide
Caution Use only the AC adapter included with your Tablet Computer. Using
other AC adapters may damage the Tablet Computer and the Battery.
Attention N'utilisez que l'adaptateur secteur fourni avec votre tablette.
L'utilisation d'autres adaptateurs secteur peut endommager la tablette et la
batterie.
Important: For users starting up the Tablet Computer for the first time with
internal battery power, please make sure the battery is fully charged before using.
Note: Measured at dimming LCD brightness. Varies depending on the usage conditions, or
when an external device is attached.
Perform the following to connect the Tablet Computer to AC Power:
 On the side of the Tablet Computer, lift the I/O protective cover by pulling on the latch.
 Plug the DC cord of the AC adapter into the Power Jack of the Tablet Computer.
 Plug the AC power cord into the AC adapter.
 Finally, Plug the AC power cord into the electrical outlet.
When the AC Adapter is connected, the battery pack starts charging. The battery LED
indicator on the Tablet Computer would show different states. Please refer to description of
LED indicator on Description of Parts.

2.13 Powering On and Off

Powering On
Press and hold the power button for 3 seconds until the blue LED power indicator light up.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Porty G4 and is the answer not in the manual?

This manual is also suitable for:

R08iwk8m-rtu1gp

Table of Contents