Installation - Saeco D.A. 8P Standard Operation And Maintenance

rent out-of-service condition. If pressed a second time it
presets the vending machine for normal service ("Out of
service" reset).
Important
If pressed after each vending machine start-up, it allows to
bypass warming phase and reach directly the " M A C H I N E
R E A D Y " condition, therefore speeding the vending machine
R E A D Y R E A D Y R E A D Y R E A D Y
setup.
TS3 Water Circuit Refill Key (fig. 8)
A short pressure recalls the water until the rinsing of first
mixer. To perform mixers rinsing cycle and then water cir-
cuit refill, you need to hold it down. By releasing the key
the cycle will be interrupted.
TS4 Cup Dispensing Key/Cup dispensing tube
rotation (fig. 8)
If pressed singularly it dispenses a cup.
If pressed simultaneously with TS5, it makes the cup dis-
pensing tube rotate.
Important
Press and hold TS5 FIRST, and then press TS4 .
Danger
Rotate cup dispensing tube only after complying with condi-
tions described in chapter "8.2 First start-up of the vending
machine - Cup dispenser" .
TS5 Functions enabling key (fig. 8)
Use it along with TS1 or TS4; individually it has no func-
tion.
Press and hold it, and only AFTERWARD press TS1 or TS4.
99588.35
fig. 8
M A C H I N E M A C H I N E
M A C H I N E M A C H I N E
-
-
-
-
-
-
-
SP1
TS1
TS2
TS3
TS4
TS5

6 - INSTALLATION

Danger
The presence of magnetic fields or vicinity of electric machines
that generate disturbance, could cause malfunctioning to the
vending machine electronic control.
Important
It is forbidden to install the vending machine outside or in
environments where water or steam jets are used.
Important
When the temperature is approaching 0 ° C internal compo-
nents containing water are subject to freezing.
Do not use the machine in such conditions.
Install the vending machine in an environment with tempera-
tures that range between 10°C and 40°C.
Make sure that no tampering is made during shipment check-
ing that the original package is unopened and fastened with
the proper straps.
Carry the box still unopened near the installation point (see "3-
Handling and Storage" ), cut the straps and lift the cardboard.
Verify the condition and the model contained in the package.
Check the customer kit and the bag of accessories enclosed to
the vending machine (see "6.1 List of accessories" )
Remove the vending machine from the original package. We
suggest saving the package for possible future moves or carriage.
Free the vending machine from the residual package.
Important
Remove foam covers that protect product containers during
the shipment (ref. A, fig. 9).
Possible disposal of package components, will have to be
done in compliance with environment and local regulations.
fig. 9
English
A
99588.08
9