Table of Contents
Advertisement
English
1 - INTRODUCTION
TO THIS MANUAL
1.1
Introduction
Important
This publication is integral part of the dispenser and must be
read thoroughly. It contains information concerning installa-
tion, maintenance and proper use of the D.A/ 8P dispenser
for both STANDARD and INSTANT versions.
Topic referring only to one version will be highlighted.
Always refer to this publication before any operation.
Important
Most of the figures show D.A. 8P STANDARD model but they
also refer to D.A. 8P INSTANT model. When necessary, both
figures will be shown.
Manufacturer: Saeco International Group
Via Panigali, 39 - 40041 GAGGIO MONTANO (Bo)
Inside the cover you will find the page with the figure the text refers
to more frequently. Keep it open when you read the publication.
This publication has to be carefully kept with the vending machine
during its operating life, including possible transfers of ownership.
In case of loss or damage of this publication, you can request a
copy to an AUTHORISED Service Centre.
All rights of reproduction of this publication are reserved by the
Manufacturer.
1.2
Symbols
Inside this publication various symbols have been used, with the
purpose of showing different levels of danger and expertise.
Upon symbol completion a message is reported.
Information that are not evidenced by symbols, are addressed to
all dispenser"s users.
Symbols utilised are:
Supply operator
It is used to indicate operations concerning personnel in charge
of the supply.
Maintenance technician
It is used to highlight operations concerning skilled personnel
in charge of maintenance and technical assistance.
4
Danger
It is used to indicate dangerous situations to personnel and
dispenser.
Important
It is used to indicate operations that, if performed, preserve
the good operation of the dispenser.
2 - GENERAL
INFORMATION
2.1
Introduction
·
The vending machine is intended for automatic distribution of
coffee and hot beverage, and it is programmable for every
single type of dispensing dosage.
·
In case of necessity or damage contact the Distributor or your
Importer, or directly the Manufacturer when there are no im-
porters.
·
AUTHORISED SERVICE CENTRES are available for every ex-
planation and information concerning the operation of the vend-
ing machine and to satisfy requests of parts supply or technical
service.
·
The Manufacturer reserves the right to improve the vending
machine without prior notice.
2.2
Vending machine
intended use
With the D.A. 8P vending machine it is possible to program auto-
matic dispensing of:
-
espresso coffee made with instantly-ground coffee beans (Stand-
ard version);
-
beverage based on lyophilised and soluble products (coffee,
chocolate, milk, tea, etc.);
-
accessories for the beverage (cup, sugar and stirrers);
-
hot water to prepare beverages.
Important
In the event of improper use, any warranty will be cancelled
and the manufacturer declines any responsibility for injury to
people and/or damage to property.
Hide quick links:
Advertisement
Table of Contents
