Installation; Figure 2-1. Connectors On The Host Adapter - Adaptec AHA-2740 User Manual

AHA-2740 Series User's Manual

Installation

This section is intended primarily for users who are new to SCSI
peripherals, or have limited experience in installing an option
board in their computer system.
Experienced users may want to refer to the Quick Installation
section described earlier in this chapter.
The comprehensive instructions in this section guide you through
terminating the SCSI bus, setting the SCSI ID, installing the
host adapter, and connecting peripherals and cables.
Once the host adapter is properly installed in your EISA system,
you will have to configure it as explained in Chapter 3,
Configuring the Host Adapter.
To assist you with installation, Figure 2-1 shows the location of
all the connectors on the host adapter.
EXTERNAL LED
CONNECTOR
SCSI CHANNEL B INTERNAL CONNECTOR
(AHA-2740T/2742T ONLY)

Figure 2-1. Connectors on the Host Adapter

2-8
Adaptec AHA-2740 Series User's Manual
Stock Number: 510381-00 / Rev. C
Print Spec Number: 491709-00 Rev C
Current Date: 9/1/93
Note
SCSI CHANNEL A
FLOPPY CONNECTOR
(AHA-2740T/2742T ONLY) INTERNAL CONNECTOR
PIN 1
PIN 1
EXTERNAL CONNECTOR
(Page 2-8)
ECN Date: 9/14/93
SCSI CHANNEL A