Specifications - Optex VVS-1 Operation Manual

Specifications

Model VVS-1
Cover color Black
Mounting height 2.2 to 4.2m (7'3" to 13'10") (Maximum height depends on the header sensor)
See Image recognition area
Image recognition area
Detection method Image recognition (Vector focus method)
Power supply 24VDC (Dedicated power supply Rating input : 85 to 264VAC 1φ
Power consumption < 5.5W
Output Activation output : Form A relay 50V 0.1A Max. (Resistance load)
Safety output : See Operation manual of the header sensor
Operation indicator See Adjustments, Checking
Output hold time Approx. 0.5sec.
Operating temperature -10°C to 50°C (14°F to 122°F)
Operating humidity 30 to 85% (No condensation)
Operating illuminance 100 to 100,000 lx
LAN specification 10/100Base -T (X)
Communication method Bluetooth 4.1
Browser Internet Explorer 11, Chrome 55 or later recommended
Warm-up Approx. 30sec. from turning ON the power supply
Weight 560g (20oz)
Accessories 1 Cable 3m (9'11") , 1 Mounting template , 1 manual set (Operation manual, Web setting manual and App User guide) ,
1 Mounting plate , 2 Mounting plate fixing screws, 1 Header sensor fixing screw (Attached to the main body) , 1 Protection seal set
*The specifications herein are subject to change without prior notice due to improvements.
Outer dimensions and part names
36 (1.4")
Image recognition area
Depth
Mounting
height
Left side
360 (1'2")
125 (5")
43 (1.7")
Door openings ドア開口部
Right side
Output voltage: 24VDC)
65.7 (2.6")
(1)
(10)
(1) Power/output connector
(2) App's password reset switch
(3) Header sensor mounting hole
(4) Header sensor connector
(5) Removing pawl
(6) IP address reset indicator
[mm (inch)]
[ Human recognition area ]
The setting upper limit value for human recognition area
(Left side / Right side / Depth) is up to 10m (32'10"). Please set
according to the setting environment.
For details, refer to Web setting manual.
[ eTracker area ]
For details, refer to Web setting manual.
[ Header sensor area ]
For details, refer to Operation manual for the header sensor.
[ Door position ]
For details, refer to Web setting manual.
- 2 -
(2) (3) (4) (5)
App's password
Header sensor
reset switch
mounting hole
VVS-1 5741220
(OA-PRESENCE TN)
Made in Japan
Wiring
1. White
Power supply : 24VDC 5. Pink (+) Header sensor fixing method
2. Brown Safety output : Opto coupler
Power consumption : < 5.5W 6. Blue (-)
3. Green Fix the header sensor, aligning the lines.
Activation output : Form A relay 7. Red (+)
4. Yellow Safety input : Opto coupler
50V 0.1A max. 8. Black (-)
Cross traffic During connecting App password Sensor
Operation Warm-up Stand-by Detection
cancel the App reset failure
indicator Green Blue Slow green & blue Fast green & Fast green アプリパスワード
リセットスイッチ
Green Red 5740120
glimmering glimmering blinking blue blinking * blinking Made in Japan
配 線
* Turn off after reflection is completed.
動作表示灯
青色グラデーション点滅： ウォームアップ時 遅い緑色/青色交互点滅：
ビスポケット 青色点灯： 待機時 速い緑色/青色交互点滅
緑色グラデーション点滅： 無駄開きキャンセル時 →消灯：
赤色点灯： 検出時 紫色点灯/青色2回点滅：
速い紫色/青色交互点滅： 故障表示 (電源投入後5分間のみ)
(11)
(7) IP address reset switch
(8) LAN port
(9) Dipswitches
(10) Screw pocket
(11) Operation indicator
(12) Camera
(6) (7) (8) (9)
IP Address
reset indicator
IP Address
reset switch
(SW1) (SW3)
Warm-up output Activation output
OFF N.O.
Alignment lines ON N.C.
IPアドレス
リセット表示灯
IPアドレス
リセットスイッチ
FCC ID : 2ABXRBVMCN5103
1.本製品を取付プレートの 2.取付プレートに押し当てながら 5741220
爪の上に載せます。 引き下げるようにして、 1 2 3 4 5 6 7 8
アプリ接続中 かん合部をはめます。
爪 Dipswitch 2, 4 to 8 is not used
アプリパスワードリセット 爪
交換目安表示
かん合部
(12)