Advertisement
Instructions for use for the clock radio
Correcting the time and date
If you wish to change the time or date after having set them, press
key
for at least 2 seconds.
12
The hour digits in the time display begin to blink and you can begin
with the adjustment as described above.
Radio operation
You can turn the radio on with the key
7
Tune into your desired station
1.Manual station selection
with the keys
and
you can tune into the frequency
13
of your desired station (in 0.05 MHz steps),
1.Automatic station selection
press and hold key
or
for at least 1 second.
13
The appliance searches for the next station in the
applicable direction.
Automatic station-memory programming(ATS)
When using the appliance for the first time (see above),
the ATS function starts automatically and saves the 12
strongest stations in the memory slots 1-12.
If you wish to repeat this process, turn the radio on and
press and hold keys
and
for 2 seconds.
13
Saving the stations individually
Tune into the the station which you wish to save.
The station you have selected can be stored in one of the
12 memory slots and be call up later:
press the MEMO key
( M blinks) a nd s elect a m emory s lot
17
with keys
.
2 9
Level p1=slots 1-6
Level p2=slots 7-12
The station is now saved.
Note
When you save a new station in a slot, the station previously in
that slot is automatically erased.
7
Advertisement
