Advertisement
Instructions for use for the clock radio
Calling up the station memories
Stored stations can be called up directly:
Using the keys
2 9
station is stored.
Level p1=slots 1-6
Level p2=slots 7-12
Note
If this does not function as described above, press the RESET key
(e. G. with a pen nib) and be gin the adjustments from the
14
beginning again.
The volume
can be adjusted with the VOL UME dial
Alarm Clock
This alarm clock is equipped with two alarm systems which can be
operated independently of each other either with an acoustic
alarm (Human Wake System/HWS) or with a radio (radio alarm clo ck).
First select either alarm 1 or 2, then select the alarm clo ck mode
(radio or acoustic alarm),then set the alarm time and activate the
alarm clock.
Alarm with radio
1.Select the station desired (programming buttons 1-12).
2.Set the desired radio alarm volume.
3.Select alarm system 1 or 2 by pressing and hol d ing the alarm
mode button
radio
or acoustic alarm (HWS) flashes .
4.Select the radio symbol
cover.
5.Once again press the station programming button selected
under 1.
6.Press the radio alarm button
The hour display flashes
Continue with
,select the memory slot in which the desired
1 or
2 for at least 2 seconds. The alarm sy mbol+
using the button
.
6
Set alarm time ...
.
13
1 or
2, to confirm your selection.
or
under the
8
Advertisement
