Regeneration <Stage 3; Regeneration <Stage 4; Regeneration <Stage 5; Regeneration <Parked Stage - Kärcher MIC 70 Manual

13.5 Regeneration <Stage 3>
ATTENTION
By now at the latest, the regeneration process has to be
started.
Stage 3: Only a <Parked Regeneration> is possible now.
The vehicle can only drive at a limited speed.
Note
The regeneration process <Parked Regeneration> is de-
scribed in a later chapter.
13.6 Regeneration <Stage 4>
ATTENTION
Regeneration must be carried out by Kärcher-Service or
by an authorised Kubota workshop.
Stage 4: The vehicle can only drive at a limited speed.
IMPORTANT: Drive the vehicle to the next safe place and
park it.
13.7 Regeneration <Stage 5>
ATTENTION
Regeneration is no longer possible. The diesel particulate
filter must be exchanged and the control program needs a
restart. This is only possible through Kärcher Service or
through an authorised Kubota workshop.
Stage 5 and last stage: The vehicle can only drive at a lim-
ited speed.
IMPORTANT: Drive the vehicle out of the hazard zone of
the traffic, and to the next safe place and park it.
13.8 Regeneration <Parked Stage>
Regeneration is only possible if the following conditions
are met. As soon as a condition is changed, the regenera-
tion process will stop.
● Neutral position
● Parking brake activated (automatic in neutral position)
● No display of error codes
● Accelerator not actuated
ATTENTION
Never interrupt the regeneration process, unless it is ur-
gently needed!
1. Drive to a safe place.
2. Park the vehicle in neutral position.
Text message: <Place in Park or Neutral>
3. Select idle speed.
4. Depending on the display, press <Un-inhibit Regen> or
<Inhibit Regen>.
English 81