Table of Contents
Advertisement
Unpacking and Initial Setup
Rack Mounting a RAIDStation7 Ultra160 SCSI Storage Array
The RAIDStation7 Ultra160 SCSI Storage Array rack mount shelf can be
installed in a standard 19 inch equipment rack. To ensure correct functionality of
the rack mounted shelf the guidelines set out previously in this chapter regarding
environmental, mechanical and electrical recommendations must be followed.
NOTE: When installing or removing a rack mount shelf, remove all power
supplies and disk drives. It is recommended that you work with at least one
other person when installing a disk shelf. This is necessary to prevent per-
sonal injury and damage to the shelf.
Installing the Storage Array in an equipment rack
1.
On each of the front mounting rails of your equipment rack cabinet, select
four holes that are spaced appropriately for the mounting holes on the Stor-
age Array.
2.
Align the holes on the flanges of the Storage Array with the holes you have
chosen in (1) above.
3.
Insert two of the screws provided with the Storage Array into the holes on
the bottom flange of the Array and the mounting holes of the equipment
rack.
4.
Insert the screws in the top flanges.
5.
Ground per Figure 2-1.
2-8
Advertisement
Table of Contents
