Table of Contents
Advertisement
Unpacking and Initial Setup
Figure 2-1. Grounding shelves within a 19 in. cabinet
A grounding point for securing the braid is provided at the rear of the rack mount
shelf.
Figure 2-2. Grounding point on disk shelf
Grounding connector
with grounding braid/wire
attached
The following materials are specified for this application:
•
Two-hole lug - Panduit, copper standard barrel, 2-hole ground lug, part no.
LCD6-10A-L
•
Cable - Copper, diameter no less than 0.162 inch / 4.11 mm, 6 AWG, mini-
mum 250V rated
•
Screws (2) - M5x8, or M5x10, zinc plated steel screws
2-4
Insert screws
to secure
Grounding Lugs
SCSI In
Connecting braid,
connected radially
from each shelf to
a common ground
point.
SCSI Ou
Advertisement
Table of Contents
