ACTiSYS IR100SD Specifications

Intelligent SIR RS232 Adapter
Intelligent SIR RS232 Adapter
Intelligent SIR RS232 Adapter
Supports mandatory IrDA
Supports upper layers TinyTP, IrCOMM, IrLPT, and OBEX transport.
Supports host baud rate from 1.2 kbps to 115.2 kbps, which is changeable by
PC utility; IrDA baud rate from 9.6 kbps to 115.2 kbps, which is flexible, setting by
IrDA devices.
Supports both IrDA Primary and Secondary mode, changing mode via a PC
utility.
No driver is needed.
IR frame and Host buffer are 2048 bytes separately.
Supply voltage 6.0 V to 12V.
Power consumption: 20 mA standby, 50 mA active.
Supports 3 wires host interface (Tx, Rx and GND).
Interface to Host:
- Full-duplex asynchronous serial (TXD, RXD)
- Hardware flow control (RTS, CTS)
-Optional line status for link control (DTR, DSR)
-Other unused inputs (RI, CD)
Internal PCBA available (Model # ACT-IR100SDi)
All trademarks, logos, company and product names are owned by the respective companies &
organizations
ACT-IR100SD / ACT-IR100SDi
®
layer: IrPHY, IrLAP, IrLMP and IAS.