Installing The Internet Phone Wizard Software - ActionTec UP101 User Manual

Installing the
Internet Phone
Wizard Software
After installing the Skype™ software (see chapter 2) and connecting the Internet
Phone Wizard to a computer and phone outlet (see chapter 3), the Internet Phone
Wizard software must be installed on the computer.
☞
Note: This procedure is performed using Windows
Windows 2000 or Windows
following certain steps for any additional instructions.
To install the Internet Phone Wizard software:
1. After connecting the Internet Phone Wizard, a "Found New Hardware" win-
dow appears. This may take up to 15 seconds.
2. Insert the Installation
the "Found New Hardware Wizard" window, click in the circle next to "Install
the software automatically (Recommended)." Click Next.
☞
Note: If the computer is running Windows 2000, when the
Found New Hardware Wizard window appears, click Next. In
the next window, click in the circle next to "Search for a suitable
driver for my device," then, in the next window, make sure the
" -
CD ROM
Service Pack 2 installed, when the Found New Hardware Wizard
window appears, click in the circle next to "No, not this time."
in the
CD
" check box is active. If running Windows XP with
(Service Pack 2), see the notes
XP
- drive of the computer, then, from
CD ROM
21
4
. If using
XP