Advertisement
Available languages
Available languages
Lift the front suspension when going up a curb or step.
The brakes should be locked when the child is placed in or taken out of the buggy.
Use only parts and accessories supplied or recommended by the manufacturer. Do not use other parts or accessories.
Do not place the product near open flame or other heat sources.
Do not use with an additional platform.
The following applies to the bassinet:
WARNING!
Use a harness as soon as the child can sit unaided
Until then, the belts should be tucked under the enclosed
mattress.
The bassinet is intended for children from birth to 9 kg.
The bassinet must not be used as a child carrier. The bassinet handle is only designed for assembly and disassembly on
the buggy frame.
Do not insert an extra mattress apart from that supplied with the product.
The following applies to the buggy:
WARNING!
This seat unit is not suitable for children under 6 months
Always use the restraint system
The product is intended for children from 6 months old to 22 kg or 4 years whichever come first.
Applies to Kinderkraft car seat:
Kinderkraft XMOOV is available also in a set with a compatible Kinderkraft car seat.
The product is intended for children from birth to 13 kg.
If the seat is used together with the chassis, it does not replace a cot or bed. For sleep, place the child in a suitable
pram body, cot or bed.
Use only parts and accessories supplied or recommended by the manufacturer.
I Buggy components
A.
Frame
B.
Parent handle
C.
Front wheels x2
D.
Rear wheels x2
E.
Safety bar
F.
Seat/bassinet 2 in 1
G.
Element of bassinet rack/seat
H.
Mattress
I.
Hood
II BUGGY FRAME ASSEMBLY To initially unfold the frame, unlock the hook (FIG. 1) and then simultaneously pull the two
free ends of the frame, until you hear the lock click (FIG. 2). Insert the rear wheel axles (D) in the corresponding slots until
you hear the lock click (FIG. 3). Slide the front wheels (C) in the corresponding slots until you hear the lock click (FIG. 4).
In the next step attach free ends of the basket (K) to the frame (FIG. 5). Insert the ends of the parent handle (B) in the
free ends of the frame (FIG. 6). Make sure the latches are secured (FIG. 6A). An unfolded frame is shown in Figure 7.
WARNING! The buggy has pumped wheels. Do not exceed the
maximum permissible pressure in the wheels, the value is
indicated on the wheel tyres.
WARNING! Before using the buggy, make sure that all the
wheels are properly installed.
J.
Footmuff
K.
Basket
L.
Car seat adapters x2
M.
Bag
N.
Baby changing mat
O.
Silicone hangers x2
P.
Mug holder
Q.
Mosquito net
R.
Rain cover
23
Advertisement
