Setting Address (Main/Rmc) Of Fcu Kit - Samsung DVM Installation Manual

Setting address of FCU KIT and installation option

Setting address (MAIN/RMC) of FCU KIT

1 Check if power is supplied to FCU KIT.
When the power is not supplied to FCU KIT, there should be additional power supply to
it.
2 Remote controller receiver of wireless remote controller is included in FCU KIT PBA.
3 Depending on the installation condition of FCU KIT, address (MAIN/RMC) to each FCU KIT
should be set.
4 Set the FCU KIT address (MAIN/RMC) by using a remote controller.
The default setting value of the FCU KIT address (MAIN/RMC) is "0A0000-100000-
200000-300000".
Option No. : 0AXXXX-1XXXXX-2XXXXX-3XXXXX
Option SEG1
Description Page
Display
Display/detail
Option SEG7
Description Page
Display
Display/detail
34
SEG2
Mode
Detail Display Detail
0 A
SEG8
Detail
No function
1
SEG3 SEG4
Setting main address Hundreds digit of address
Display Detail Display Detail
No main
0
address
0 Hundreds digit
Address
1 setting
mode
SEG9 SEG10
Setting RMC address
Display Detail
No main
0
No function
address
Address
1 setting
mode
SEG5 SEG6
Tens digit of address Ones digit of address
Display Detail Display Detail
0~9 Tens digit 0~9 Ones digit
SEG11 SEG12
Group channel(*16) Group address
Display Detail Display Detail
RMC1 0~F RMC2 0~F