Samsung DVM Installation Manual page 30

Setting address of FCU KIT and installation option
Status
SEG4
SEG6
SEG9
30
3 Setting SEG4, SEG5 option
Press [Fan ∨ ] button to enter SEG4 value.
Press [Fan ∧ ] button to enter SEG5 value.
Each time you press the button, [SEG image] will be
SEG5
selected in rotation.
4 Setting Dry mode
Press [Mode] button to change to Dry mode in the On
status.
5 Setting SEG6, SEG8 option
Press [Fan ∨ ] button to enter SEG6 value.
Press [Fan ∧ ] button to enter SEG8 value.
Each time you press the button, [SEG image] will be
SEG8
selected in rotation.
6 Setting Fan mode
Press [Mode] button to change to Fan mode in the On
status.
7 Setting SEG9, SEG10 option
Press [Fan ∨ ] button to enter SEG9 value.
Press [Fan ∧ ] button to enter SEG10 value.
Each time you press the button, [SEG image] will be
SEG10
selected in rotation.
8 Setting Heat mode
Press [Mode] button to change to Heat mode in the On
status.
Setting an option