FCU KIT and FCU interface module is for integrated control of FCU with DVM CHILLER by
DMS 2.5.
Maximum number of FCU interface modules that can be installed to a BACnet/LonWorks,
and maximum number of FCU KITs that can be installed to a FCU interface module is
both 16.
Maximum number of FCU interface modules that can be installed to a channel of BACnet/
LonWorks is 16.
Some functions of wired remote controller may not work. (Refer to page 47.)
FCU interface module should be installed inside of FCU KIT.
CAUTION
• Install FCU that has terminal block to fix power cable by screw. Do not connect power
cable by cutting.
11