Installation Guide Hardware installation Install the AMCs—optional If you are adding advanced mezzanine cards (AMCs) to the CPM, follow the steps in the Advanced Mezzanine Card (AMC) Installation Guide. Install the rear transition module—optional The optional RTM is hot-swappable—it can be installed Retaining before or after the CPM is installed and while power is screw...
Page 4
Software configuration and installation Connect a computer terminal to the serial port This section explains how to connect a computer terminal in order to display and interact with the operating system software. 1. Connect a serial cable to the serial port of the CPM. 2.
For more information about configuring the OS for the CPM and installing the OS onto a hard disk, see the RadiSys Developer’s Guide, which is included in the Promentum software distribution. 2. Install the RadiSys RPM packages from the Promentum software distribution (optional). For information about installing packages, see the Software Guide for Management Processors and General Purpose Computing Processors.