Important Safety Advice - Dimplex Monterey Instruction Manual

IMPORTANT
THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR
FUTURE REFERENCE. Note also the information presented on the appliance
CAUTION: FAILURE TO FOLLOW THESE INSTRUCTIONS MAY CAUSE INJURY AND/
OR DAMAGE AND MAY INVALIDATE YOUR GUARANTEE

IMPORTANT SAFETY ADVICE

When using electrical heaters, basic precautions should always be followed to reduce
the risk of fi re, electrical shock, and injury to persons, including the following:
IMPORTANT: The wall bracket supplied with the heater must be used.
IMPORTANT: All packaging should be disposed of in an appropriate manner.
OVERHEATING WARNING
WARNING: In order to avoid overheating, do not cover or obstruct the heater. Do not
place material or garments on the heater, or obstruct the air circulation around the heater,
for instance by curtains or furniture, as this could cause overheating and a fi re risk. NEVER
cover or obstruct in any way the heat outlet slots at the top of the heater or the air inlet
slots in the base of the heater.
WARNING: THE SURFACES ON THIS HEATER CAN BE HOT. The heater carries
a warning 'DO NOT COVER' to alert the user to the risk of fi re that exists if the
heater is accidentally covered. DO NOT place combustible items through the
heater grille.
CAUTION: Some parts of this product can become very hot and cause burns. Particular
attention has to be given where children and vulnerable people are present.
For your safety this heater is fi tted with a thermal cut-out. In the event that the
product overheats for some reason, the cut-out prevents excessive temperatures on
the product by cutting the power to the heater. Once the heater has cooled down,
it will reset automatically, it will continue to cycle on and o
reason for overheating is removed. The display screen may fl ash red to indicate the
product has overheated. To reset the display, remove the obstruction and hold Enter
for 10 seconds.
2
automatically until the