Pyronix ATLAS 4 Installation Instructions Manual page 20

10.26 Maintenance and Priority Codes
Enter
both
To use HEX codes, use the
Reporting codes are automatically stored after pressing the
10.27 Restoral Reporting Codes
Enter
To use HEX codes, use the
Reporting codes are automatically stored after pressing the
10.28 Digicom Codes
Enter Enter digit 0 - 6 .
Page 20
Enter 2 digits for eight maintenance / priority codes. To disable an event insert blanks for
P.A. alarm entered at RKP
Fire alarm entered at RKP
Engineer mode entered
Bell fuse failure
Auxiliary fuse failure
Battery trouble
AC fail
Keypress Tamper
key to select the character required and the
User Code Restoral
Bell Timeout Restoral
Battery restoral
A.C. Restoral
Test Transmission
key to select the character required and the
SIA DTMF
SIA pulse format P1 - 1400 Hz handshake 10pps
SIA pulse format P2- 2300 Hz handshake 20pps
SIA pulse format P3 - 1400 Hz handshake 20pps
Reserved
Reserved
Reserved
e.g. 2 digit code
key to accept.
key.
e.g. 2 digit code
key to accept.
key.