Acnodes PANEL PC 1000 User Manual page 33

PANEL PC 1000 All-in-One PANEL PC User's Manual
(III) +48V DC Power Supply
Input Specifications
$" Input voltage range: +36V
$" Input current: 3A at +48V
Output Specifications
$" Load Range:
Min. Load
Output
+5V
+12V
-12V
At factory, all outputs in 60% rated load conditions, the
+5V output is set to between 4.95V and 5.05V, and the
other outputs are checked to be within the specified
voltage accuracy range.
$" Ripple and Noise:
The peak-to-peak ripple and noise for +5V output is less
than 60mV and less than 100mV for +/-12V outputs.
Measuring is done by 15MHz bandwidth limited
oscilloscope and terminated each output with 0.47uF
capacitor.
Line Regulation:
$"
The line regulation for +5V output is less than +/-1%, for
+12V is less than +/-2%, for –12V is less than +/-3% while
measuring at rated loading and +/-10% of input voltage
changing.
$" Load Regulation:
The load regulation for +5V is less than +/-3%, for +12V is
less than +/-5%, -12V is less than +7% -3%, measuring is
done by changing the measured output loading +/-40%
from 60% rated load, and keep other output at 60% rated
load.
Power Supply Specifications
to +72V
DC DC
max.
DC
Rated Load
0A 10A
0A 1.5A
0A 0.3A
Voltage Accuracy
4.95V to 5.05V
11.4V to12.6V
-11.4V to –12.6V
25