Advertisement
Connect Your Devices
The ML2410 lets many devices share your Internet connection. Devices can
connect by using WiFi or by plugging into one of the ML2410 Ethernet ports.
WiFi Wireless
You can connect any of your WiFi devices by first going into the WiFi setup
section for the device (not the router). Then use the ML2410 router's WiFi
Network Name (SSID) and WiFi Password/Key. The unique factory-set
default settings are printed on a label on the bottom of the ML2410. If you
prefer to use a different network name and password, please see the chapter.
Changing Wireless Security Settings in the full length manual at
www.motorolanetwork.com/ML2410manual
Wired Ethernet
You can also connect up to two HDTVs, computers, game stations, or other
devices with an Ethernet cable between an Ethernet port of the device and
any one of the LAN jacks on the router. Some devices have a Network Setup
section where you specify a wired Ethernet connection. If you have a
problem with a particular device, consult its user manual.
Once you've set up a Wireless or Wired Ethernet connection, try to browse
the Web. If browsing works, Congratulations! Your ML2410 is working.
If your ML2410 is NOT working, see Troubleshooting Tips and We like to
help at the end of this Quick Start.
USB 3.0 Port
Also available on the rear panel is a High-speed USB 3.0 port for connecting
USB memory devices or external hard drives. This port can be used to attach
USB Drives, that can then be accessed through the network. For more
information on this feature go to
www.motorolanetwork.com/ML2410manual
. A cable for this port is not
provided with the ML2410. Use a standard USB 3.0 cable to connect USB
3.0 devices, or a USB 2.0 cable can be used for USB 2.0 devices. For the
ML2410-side of the connection, the cable needs to have a USB type-A male
connector.
Advertisement
