Download Print this page

Motorola ML2410 Quick Start Manual

Ac 1900 lte router
Hide thumbs

Advertisement

Quick Links

AC1900 LTE Router
Quick Start
Model ML2410

Advertisement

loading

  Also See for Motorola ML2410

  Related Manuals for Motorola ML2410

  Summary of Contents for Motorola ML2410

  • Page 1 AC1900 LTE Router Quick Start Model ML2410...
  • Page 2 If the Cell Status light does not turn on please see troubleshooting tips at the end of this Quick Start. If you want to use the ML2410 as cellular backup continue below, otherwise skip ahead to Connect your Devices...
  • Page 3 Ethernet cable into one of the ML2410’s LAN jacks and the other into your desktop or laptop’s Ethernet port. To connect via WiFi to the ML2410, go into the WiFi setup section for the device (not the router). Then use the ML2410 router’s WiFi Network Name (SSID) and WiFi Password/Key.
  • Page 4 Next check the box next to Enable Cellular Backup. This will turn on cellular backup in case your Internet connections goes down. The ML2410 should automatically detect your SIM card and should be configured correctly.
  • Page 5: Connect Your Devices

    (not the router). Then use the ML2410 router’s WiFi Network Name (SSID) and WiFi Password/Key. The unique factory-set default settings are printed on a label on the bottom of the ML2410. If you prefer to use a different network name and password, please see the chapter.
  • Page 6 MotoManage app on your smartphone or tablet. 2 Open the app. 3 Scan the QR code on the bottom of your ML2410 to setup your device’s WiFi network. 4 Now enjoy the app. You can easily elect to keep your original name and password, as we recommend.
  • Page 7: Improving Wifi Performance

    Note that WiFi performance depends on a number of factors. Please keep these things in mind: • Where possible, put the ML2410 in a central place so that it’s not too far away from your other WiFi devices. • Don’t put the ML2410 close to interference-generating wireless devices such as Bluetooth headsets and stereos, microwave ovens, 2.4 GHz cordless...
  • Page 8 Top/Front Panels LIGHT COLOR DESCRIPTION Green: ML2410 power on Green OFF: ML2410 power off Amber: ML2410 powering up Power Amber Green: Connected in LTE mode Green Amber: Connected in 3G mode Cell Status Blinking: Sending data Amber Off: Not Connected...
  • Page 9 The type of back-up battery that must be used with this product is Model 98250 from MTRLC LLC, and is labeled BP-15033-22/2150 S. Note that in the case of loss of power, the ML2410 can provide up to 6 hours of Internet access when equipped with the optional battery. You can maximize the runtime on battery by turning off certain features in the ML2410 configuration manager.
  • Page 10: Troubleshooting Tips

    • First check that the ML2410’s Power light is on. The yellow Ethernet jack on the back of the ML2410 has a green LED on it. This LED should be on when the Ethernet cable is plugged in. If it is not on,...
  • Page 11 Ethernet cable might be bad; try an Ethernet cable that you know is working. • I’m plugging the ML2410’s WAN port of a modem and cannot access the Internet. • Power cycle the modem This will cause it to request a new IP address.
  • Page 12: Limited Warranty

    We like to help. Please visit our support Website or call our support specialists. Our Website has our Motorola Mentor information, and also provides returns and warranty information. www.motorolanetwork.com/support Email: support@motorolanetwork.com Phone: In the US and most other countries: 800-753-0797 or +1 617-753-0562...
  • Page 13 Do not put the ML2410 or its power cube in water, since this is a shock hazard. Protect the ML2410 from moisture and be careful about temperature.
  • Page 14 PO Box 121147 Boston, MA 02112-1147 ©MTRLC LLC 2020. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. All rights reserved.