Use Your Soundbar; Turn On And Off; Auto Standby; Select Modes - Philips 8000 Series User Manual

4 Use your
Soundbar
This section helps you use the Soundbar to
play audio from connected devices.
Before you start
•
Make the necessary connections
described in the quick start guide and
the user manual.
•
Switch the Soundbar to the correct
source for other devices.

Turn ON and OFF

•
When you first connect the unit to the
main socket, the unit will be in STANDBY
mode. The STANDBY indicator will light
up white.
Power
Action
State
On
Press the
Semi
button
Standby
once
Press and
Eco
hold
Standby button 5
seconds

Auto Standby

The unit automatically turns to Standby
mode after about 15 minutes if the TV or the
external unit is disconnected, switched off.
•
To switch the unit off completely, remove
the mains plug from the mains socket.
•
Please turn the unit off completely to
save energy when not in use.
Function
•
Follow source state
•
Wi-Fi is still on.
•
It still supports Play-Fi
and Airplay 2.
•
Wi-Fi is off.
•
The product enters
the lower power
consumption mode.
•
Restarting the system
will take a relatively
longer time.

Select Modes

Press the button repeatedly on the unit
or on the remote control to select the HDMI
ARC, OPTICAL, AUX, USB, BT mode.
» The selected mode will show on the
display.
» Play-Fi is not an optional source. Play-Fi
needs to be directly controlled by APP.

Adjust the Volume

Adjust the Soundbar's Volume
+/- (Volume) to increase or
Press
decrease a volume level.
•
To mute sound, press Mute.
•
To restore the sound, press Mute again or
press Vol+/Vol- (Volume).
Adjust the Subwoofer's Volume
Press +/- (subwoofer) to increase or
decrease the built-in subwoofer's volume
level.

Virtual Surround mode

Experience an immersive audio experience
with Virtual Surround modes.
Press button on the remote control to
turn Virtual Surround mode on or off.
•
SUR ON: turn on virtual surround.
•
SUR OFF: turn off virtual surround.

Factory Reset

Reset device to default setting
• The set is ON, press and hold VOL -
and VOL + on the unit until the display
shows "RESET" to reset the whole
system setting include Wifi module
setup setting.
15