Philips 8000 Series User Manual page 14

Note
•
After connection, the product may perform
a software update. Upgrade is required after
initial set up. Without the upgrade, not all
product features can be available.
•
When the first time set up is not successful,
hold down the Wi-Fi button on soundbar for
8 seconds until the second tone can be heard
and the Wi-Fi light is changed to slow pulse.
Reset the Wi-Fi connection, restart the app
and start the set up again.
•
If you want to change from one network to
another, you need to set up the connection
again. Press hold down the
button on the soundbar for 8 seconds to reset
the Wi-Fi connection.
WPS mode
If your router has Wi-Fi Protected Setup
(WPS), you can set up the connection
without entering a password.
1
Press and hold the Wi-Fi button for 4
seconds. You will hear a tone and the
Wi-Fi light will begin in double blink.
2
Press the WPS button
on your router. The
button is normally
marked with this WPS
logo.
3
Follow the instruction in Philips Sound
App powered by DTS Play-Fi to start the
pairing.
Note
•
WPS is not a standard feature on all routers.
If your router does not have WPS then use
Standard Wi-Fi Setup.
•
Press the (Wi-Fi) button once if you want
to exit the WPS mode or it will automatically
exit after 2 minutes.
14
(Wi-Fi) Wi-Fi
WPS