Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Albalá Ingenieros SMC2000C01
Summary of Contents for Albalá Ingenieros SMC2000C01
- Page 1 SMC2000C01 GIGABIT ETHERNET MEDIA CONVERTER.IT PROVIDES TWO RJ45 GIGABIT INTERFACES AND A SFP CAGE FOR A 2.5 Gbit OPTICAL MODULE Version 1.0 Albalá Ingenieros, S.A. 24 October 2017 - © Albalá Ingenieros S.A. - All rights reserved Medea, 4 - 28037 Madrid - Spain...
- Page 2 SMC2000C01...
- Page 3 When the module incorporates any optional SFP optic fiber transmitter provided by Albalá Ingenieros, the SMC2000C01 is a CLASS 1 LASER product as per the IEC 60825-1 standard. Please read the safety instructions included in this manual carefully before using this module.
- Page 4 SMC2000C01...
-
Page 5: Table Of Contents
4. OPERATION ........................17 4.1. Front panel description ......................17 4.2. Functional description ....................... 18 4.3. Module remote control and supervision ................19 4.3.1. Details of the SMC2000C01 registers ................20 5. GLOSSARY ........................23 6. REGULATIONS ........................25 7. VERSIONS ......................... 27... - Page 6 SMC2000C01...
-
Page 7: Description
The optical port must be configured according to the capabilities of the SFP modules installed. The SMC2000C01 is a TL2000 terminal line module and can be housed in a two rack unit (2 RU) UR2000 mounting frame. It is possible to monitor the SMC2000C01 status remotely using a communications controller module installed in the same mounting frame. -
Page 8: Block Diagram
Albalá Ingenieros | Manual SMC2000C01 1.3. Block diagram... -
Page 9: Specifications
Albalá Ingenieros | Manual SMC2000C01 2. SPECIFICATIONS Ethernet interface Connector RJ45 (ports 1 & 2) Connector According to SFP-MSA (optical port) Encoding and electrical characteristics: 1000BASE-X According to IEEE std 802.3-36 standard 1000BASE-T According to IEEE std 802.3-40 standard 100BASE-T According to IEEE std 802.3-24,25... - Page 10 Albalá Ingenieros | Manual SMC2000C01 SMC2000C01...
-
Page 11: Installation
3.2. Safety instructions When the module incorporates any optional SFP optic fiber transmitter provided by Albalá Ingenieros, the SMC2000C01 is a CLASS 1 LASER product as per the IEC 60825-1 standard. Please read the safety instructions included in this manual carefully before using this module. -
Page 12: Environmental Considerations
Albalá Ingenieros | Manual SMC2000C01 • The SMC2000C01 is used with optic transmitter modules that contain laser diodes. These modules are CLASS 1 LASER products. Due to its features these devices are inherently safe. However, exercise CAUTION as there is invisible laser radiation in the fiber optic connectors. -
Page 13: Installing The Module In The Mounting Frame
1 - Remove the blank panel covering the front of the empty slot chosen for installing the SMC2000C01 in the mounting frame. 2 - Insert the SMC2000C01 module into the front of the mounting frame. The edges of the card slide into two plastic guides inside the mounting frame. -
Page 14: Interconnection
Albalá Ingenieros | Manual SMC2000C01 3.6. Interconnection The arrangement of the front panel connectors of the SMC2000C01 module is shown in the following figure. Front panel of the SMC2000C01 The two RJ-45 connectors labeled PORT 1 and PORT 2 are electrical interfaces for connection to 10Base-T, 100Base-T or 1000Base-T local area networks (LANs) as per IEEE std 802.3. -
Page 15: Connecting To The Optical Port
Albalá Ingenieros | Manual SMC2000C01 3.6.2. Connecting to the optical port The SFP fiber optic module must be inserted into its housing as described previously before interconnection. Modules for fiber optic transmission using the 1000Base-LX, 1000Base-SX as per IEEE std 802.3 or modules for transmission via cabling using 1000Base-CX as per IEEE std 802.3 can be installed. - Page 16 Albalá Ingenieros | Manual SMC2000C01 SMC2000C01...
-
Page 17: Operation
Albalá Ingenieros | Manual SMC2000C01 4. OPERATION This section describes the significance of the front panel indicators of the SMC2000C01 module and their remote control and monitoring ability. 4.1. Front panel description The appearance of the front panel and the elements it contains are shown in the following illustration. -
Page 18: Functional Description
Albalá Ingenieros | Manual SMC2000C01 4.2. Functional description The SMC2000C01 operates a a three-port Ethernet switch in which the ports are not user-manageable. -
Page 19: Module Remote Control And Supervision
Albalá Ingenieros | Manual SMC2000C01 4.3. Module remote control and supervision The SMC2000C01 can optionally be remotely controlled/supervised. In order to perform remote configuration and supervision of the module an optional TL2000 family remote communications controller must be installed in the mounting frame. -
Page 20: Details Of The Smc2000C01 Registers
- Supervision of the status of the links that are established in each port. 4.3.1. Details of the SMC2000C01 registers The SMC2000C01 module provides control and status registers that can be read and written by means of specific commands described in the communication control module user manuals. - Page 21 Albalá Ingenieros | Manual SMC2000C01 P1_STATUS 0x02 0x0F Ethernet connection status in Port 1 0=10Mbps HD, 1=100Mbps HD, 2=1Gbps HD, 4=10Mbps FD, 5=100Mbps FD, 6=1Gbps FD, 7=2.5Gbps, 8=No link P2_STATUS 0x03 0x0F Ethernet connection status in Port 2 0=10Mbps HD, 1=100Mbps HD, 2=1Gbps HD, 4=10Mbps FD, 5=100Mbps FD, 6=1Gbps FD, 7=2.5Gbps, 8=No link...
- Page 22 Albalá Ingenieros | Manual SMC2000C01 SMC2000C01...
-
Page 23: Glossary
Albalá Ingenieros | Manual SMC2000C01 5. GLOSSARY Small Form-factor Pluggable. A specification that defines the size, format and electrical characteristics of a class of modules typically employed to convert data signals from electrical to optical format, from optical to electrical format and transmission of those... - Page 24 Albalá Ingenieros | Manual SMC2000C01 SMC2000C01...
-
Page 25: Regulations
Albalá Ingenieros | Manual SMC2000C01 6. REGULATIONS IEC 60825-1 (2008) Safety of laser products, Part 1: Equipment classification, requirements and user's guide. IEEE std 802.3 (2008) Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications. - Page 26 Albalá Ingenieros | Manual SMC2000C01 SMC2000C01...
-
Page 27: Versions
Albalá Ingenieros | Manual SMC2000C01 7. VERSIONS Ver. Date Description 02-03-2017 Preliminary Version 24-10-2017 First version... - Page 28 Albalá Ingenieros, S.A. Medea, 4 - 28037 Madrid Spain +34 913274453 www.albalaing.com info@albalaing.com...
Need help?
Do you have a question about the SMC2000C01 and is the answer not in the manual?
Questions and answers