Table of Contents
Related Manuals for Albalá Ingenieros HVM0002C01
Summary of Contents for Albalá Ingenieros HVM0002C01
- Page 1 HVM0002C01 DUAL 3G/HD/SD-SDI DIGITAL VIDEO TO DVI CONVERTER WITH LOUDENESS MEASUREMENT IN BOTH CHANNELS Version 1.0 Albalá Ingenieros, S.A. 21 April 2016 - © Albalá Ingenieros S.A. - All rights reserved Medea, 4 - 28037 Madrid - Spain...
- Page 2 HVM0002C01...
- Page 3 When the module incorporates any optional SFP optic fiber transmitter provided by Albalá Ingenieros, the HVM0002C01 is a CLASS 1 LASER product as per the IEC 60825-1 standard. Please read the safety instructions included in this manual carefully before using this module.
- Page 4 HVM0002C01...
-
Page 5: Table Of Contents
DUAL 3G/HD/SD-SDI DIGITAL VIDEO TO DVI CONVERTER WITH LOUDENESS MEASUREMENT IN BOTH CHANNELS Version 1.0 1. DESCRIPTION ........................7 1.1. The HVM0002C01 .......................... 7 1.2. Features ............................. 9 1.3. Block diagram ..........................10 2. SPECIFICATIONS ....................... 11 3. INSTALLATION ........................15 3.1. - Page 6 4.3.1. Details of the HVM0002C01 registers ................. 30 5. GLOSSARY ........................39 6. REGULATIONS ........................41 7. VERSIONS ......................... 43...
-
Page 7: Description
The HVM0002C01 can be configured so that the signal used in one section is taken from one of the two interfaces (electrical or optical) of that section or from one of the interfaces of the adjacent section. - Page 8 Albalá Ingenieros | Manual HVM0002C01 The HVM0002C01 is powered by an external wall adapter supplied with the equipment. The power supply connection has a security system that attaches the power cable to the equipment case with a threaded connector, avoiding any mechanical stress on the cable due to accidental disconnection.
-
Page 9: Features
Albalá Ingenieros | Manual HVM0002C01 1.2. Features • Dual 3G/HD/SD-SDI digital video to DVI digital video converter. • Includes two sections, each of which provides: - One BNC electrical interface for 3G/HD/SD-SDI digital video configurable as an input or output. -
Page 10: Block Diagram
Albalá Ingenieros | Manual HVM0002C01 1.3. Block diagram... -
Page 11: Specifications
Albalá Ingenieros | Manual HVM0002C01 2. SPECIFICATIONS SD/HD/3G-SDI digital video signal input Connector Impedance 75 Ω ± 1 % Return loss: Up to 3 GHz >10 dB Up to 1.5 GHz >15 dB Number of inputs 1 per section, 2 sections... - Page 12 Albalá Ingenieros | Manual HVM0002C01 DVI digital video signal output Connector DVI Digital Signal formats According to DVI Rev. 1.0 standard Maximum pixel rate 148.5 MHz (1080p50, 1080p59.94) Number of outputs 1 per section Headset audio output Connector 3.5 mm stereo jack Headset impedance >16 Ω...
- Page 13 Albalá Ingenieros | Manual HVM0002C01 General Operating temperature range 0 .. 50 °C Dimensions 134 mm x 35 mm x 185 mm Approximate weight 650 g...
- Page 14 Albalá Ingenieros | Manual HVM0002C01 HVM0002C01...
-
Page 15: Installation
3.1. Initial inspection The HVM0002C01 is a desktop unit and does not require installation in a rack or similar housing. However, it has threaded fasteners for M4 screws at its base for attachment to a panel or other surfaces if necessary. - Page 16 • The HVM0002C01 is a telecommunications infrastructure device and must be installed and operated by technicians with appropriate training. • The HVM0002C01 is powered by DC voltage. This voltage must be obtained from the external power supply included with the equipment, or from another supply that converts the mains voltage into a Safety Extra Low Voltage (SELV) as per EN 60950-1.
-
Page 17: Attachment
HVM0002C01 3.3. Attachment The HVM0002C01 has four rubber feet for desktop operation. It also has threaded fasteners to hold it in any position on any surface. These fasteners accept M4x0.7 screws and penetrate 3 mm into the device. Installation must be away from heat sources and there should be no obstacles to airflow. -
Page 18: Interconnection
- Control and supervision. 3.6.1. Power supply connection The HVM0002C01 power supply is connected via a 2.5 mm jack and the voltage must be between 5 and 15 VDC. The equipment contains an internal switched mode regulator that allows this wide range of input voltages without reducing energy efficiency. -
Page 19: Optical Sdi Video Connections
HVM0002C01. It is important to keep in mind that the transmitter modules have their Section A on the right when looking into the module from the side where the fiber... -
Page 20: Dvi Video Connections
The HVM0002C01 cannot function with SFP modules that consist of one transmitter and one receiver. SFP modules not approved by Albalá Ingenieros should never be used, as this can cause improper functioning of the HVM0002C01 or even damage it. -
Page 21: Control And Supervision Connections
Type A connector on the computer side and a mini-Type B connector on the HVM0002C01 side. The first time that the module is connected to a computer it is necessary to install a driver that allows the operating system to use the USB connection of the module as a standard serial port. - Page 22 Albalá Ingenieros | Manual HVM0002C01 HVM0002C01...
-
Page 23: Operation
Albalá Ingenieros | Manual HVM0002C01 4. OPERATION This section describes the significance of the HVM0002C01's indicators and equipment operation when a signal is applied. 4.1. Upper panel description The appearance of the upper panel and the elements it contains are shown in the following illustration. -
Page 24: Functional Description
DVI output and via any available SDI outputs - electrical if configured as such or optical if an SFP transmitter module is installed. Using the multiplexing ability of the HVM0002C01 the electrical or optical input from... -
Page 25: Audio De-Embedder
The DVI interfaces include control lines through which the format of the video being transmitted can be negotiated. The HVM0002C01 will output a signal via DVI in the same format in which that signal was received in SDI. The only exception is for the 485i59.94 and 576i50 formats which are not defined in the DVI standard, and some... -
Page 26: H And V Delays
These delays have a fixed position and can be activated using the control software. 4.2.4. Generator and response to loss of signal Each section of the HVM0002C01 includes a video generator that can be used to deliver a signal at the corresponding output other than the signal received at that section's input, or to continue delivering an output signal when the input video signal is lost. -
Page 27: Frame Buffer
4.2.5. Frame buffer Section A of the HVM0002C01 provides a frame buffer between its input and output. When activated this frame memory maintains the stability of the SDI and DVI outputs for both the horizontal and the vertical sync in the face of any changes to or losses of the input video signal. -
Page 28: Other Functions
This selection can be set using the control software. 4.2.8. SFP modules SFP modules are not necessary for the HVM0002C01 to operate properly, but they do add the useful functions of electrical-to optical and optical-to-electrical conversion. SFP modules manufactured by Albalá Ingenieros are recommended because they provide diagnostic capabilities that are not possible with SFP modules from other manufacturers. -
Page 29: Module Remote Control And Supervision
Software for simple configuration and supervision with a GUI for multiple modules can be downloaded from the Albalá Ingenieros website. The following functions of the HVM0002C01 can be performed remotely: - Loading and storage of the user presets. - Specification of the signal direction for each of the electrical and optical ports. -
Page 30: Details Of The Hvm0002C01 Registers
Albalá Ingenieros | Manual HVM0002C01 4.3.1. Details of the HVM0002C01 registers The HVM0002C01 module provides control and status registers that can be read and written by means of specific commands described in the communication control module user manuals. The parameter information grouped in the CONTROL or RAM sections is stored in volatile memory. - Page 31 Albalá Ingenieros | Manual HVM0002C01 H_DELAY_B 0x02 0x10 Allows selecting H delay (Section B) 0=No, 1=Yes V_DELAY_B 0x02 0x20 Allows selecting V delay (Section B) 0=No, 1=Yes SDI_OSD_B 0x02 0x40 Allows inserting OSD for Time-Code and PPMs in SDI output (Section B)
- Page 32 Albalá Ingenieros | Manual HVM0002C01 PPM_NUMBER_B 0x0D 0x07 Allows selecting number of PPM to insert (Section B) 0=No PPM insertion, 1=1 PPM, 2=2 PPM, 3=3 PPM, 4=4 PPM, 7=Automatic PPM PPM_DISTRIB_B 0x0D 0x08 Allows selecting distribution of PPM in screen (Section B)
- Page 33 Albalá Ingenieros | Manual HVM0002C01 Name snmp trap Description NO_EL_SIG_A 0x01 0x01 Electrical input signal status (Section A) 0=OK,1=Fail NO_OP_SIG_A 0x01 0x02 Optical input signal status (Section A) 0=OK,1=Fail EDH_CRC_FAIL_A 0x01 0x04 Indicates presence of EDH/CRC errors (Section A) 0=OK,1=Fail...
- Page 34 Albalá Ingenieros | Manual HVM0002C01 SDI_FORMAT_B 0x07 0x0F Indicates the SDI format for selected input port (Section B) 0=576i50,1=486i59.94,2=720p50,3=720p59.94,5=1080i50,6=1080i59.94,8=108 0p25,9=1080p29.97,10=1080p50,11=1080p59.94,?=Unknown GRP1_B_PRES 0x07 0x10 Group 1 presence (Section B) 0=No, 1=Yes GRP2_B_PRES 0x07 0x20 Group 2 presence (Section B) 0=No, 1=Yes...
- Page 35 Albalá Ingenieros | Manual HVM0002C01 H_DELAY_A 0x01 0x10 Allows selecting H delay (Section A) 0=No, 1=Yes V_DELAY_A 0x01 0x20 Allows selecting V delay (Section A) 0=No, 1=Yes SDI_OSD_A 0x01 0x40 Allows inserting OSD for Time-Code and PPMs in SDI output (Section A)
- Page 36 Albalá Ingenieros | Manual HVM0002C01 PPM_DISTRIB_A 0x0B 0x18 Allows selecting distribution of PPM in screen (Section A) 0=1 Row, 1=2 Rows Up-Down, 3=2 Rows Left-Right PPM_CENTER_A 0x0B 0x20 Allows moving PPM far from screen edges (Section A) 0=No, 1=Yes PPM_PHASE_A...
- Page 37 Albalá Ingenieros | Manual HVM0002C01 RGB_SCALED_A 0x13 0x20 RGB scaling to show all color values (Section A) 0=No, 1=Yes CUT_BY_GPI_B 0x14 0x01 Selects between using GPI1 to launch video cut or using SDK3000 control flag (Section B) 0=Flag, 1=GPI1 CUT_B...
- Page 38 Albalá Ingenieros | Manual HVM0002C01 DVI_SD_PROG_A 0x04 0x10 Indicates progressive SD in DVI output (Section A) 0=No, 1=Yes DVI_AUD_A 0x04 0x20 Indicates that selected audio pair is embedded in DVI stream (Section A) 0=No, 1=Yes OPT_RX_PWR_A 0x05 0xFF Indicates received optical power (Section A)
-
Page 39: Glossary
Albalá Ingenieros | Manual HVM0002C01 5. GLOSSARY A term used to refer to 1080 line, progressive scan television systems with a serial interface bitrate of approximately 3 Gbit/s. 3G/HD/SD-SDI 3G/HD/SD - Serial Digital Interface for high definition or standard definition digital television capable of transmitting bitrates of 2.970 Gbit/s, 2.967 Gbit/s, 1.485 Gbit/s,... - Page 40 Albalá Ingenieros | Manual HVM0002C01 General Purpose Output. This is a signaling and control interface that transmits information via closure of a contact. A GPI input is typically used at the other end of the line. An abbreviation for High Definition Television (HDTV).
-
Page 41: Regulations
Albalá Ingenieros | Manual HVM0002C01 6. REGULATIONS DVI Rev. 1.0 (1999) Digital Visual Interface. EBU Tech. 3341 (2010) Loudness Metering: 'EBU Mode' metering to supplement loudness normalisation in accordance with EBU R 128. See also: EBU R 128, ITU-R BS.1770-2... - Page 42 Albalá Ingenieros | Manual HVM0002C01 HVM0002C01...
-
Page 43: Versions
Albalá Ingenieros | Manual HVM0002C01 7. VERSIONS Ver. Date Description 13-06-2013 Preliminary Version 21-04-2016 First version... - Page 44 Albalá Ingenieros, S.A. Medea, 4 - 28037 Madrid Spain +34 913274453 www.albalaing.com info@albalaing.com...
Need help?
Do you have a question about the HVM0002C01 and is the answer not in the manual?
Questions and answers