Table of Contents
Advertisement
FPC 8121 User's Manual
Specification(FPC 8121)
Touch Screen:
Touch Screen Controller:
Communications:
Contact bounce:
Board Size:
Operating Temperature:
3.1.1 Driver Installation- Windows XP
The touch screen of FPC 8121 provides a driver for use with
Windows XP. To facilitate installation of the touch screen driver, you
should read the instructions in this chapter carefully before you
attempt installation.
1.
Insert Driver CD and select the "driver\
Driver\Touch\Windows XP Driver V4.0(WHQL)\Setup.exe"
2.
Follow the install procedure and press OK.
3.
Click Start menu and select "PenMount Utilities". You can see
PenMount Control Panel
26
For 5-wire analog resistive type
Penmount 51A5E
USB interface
< 15ms
271.2 x 205.7 mm
-10℃ ~ 60℃ Humidity less than 85% RH
Advertisement
Table of Contents
