Table of Contents
Advertisement
Before getting started, read the following important cautions.
1. The
FPC 8121
operating system. An operating system must be loaded first
before installing any software into the computer.
2. Be sure to ground yourself to prevent static charge when
installing the internal components. Use a grounding wrist strap
and place all electronic components in any static-shielded
devices. Most electronic components are sensitive to static
electrical charge.
3. Disconnect the power cord from the FPC 8121 before making
any installation. Be sure both the system and the external
devices are turned OFF. Sudden surge of power could
ruin
sensitive
8121 is properly grounded.
4. The brightness of the flat panel display decreases with usage.
However, hours of use vary depending on the application
environment.
5. Turn OFF the system power before cleaning. Clean the
system using a cloth only. Do not spray any liquid cleaner
directly onto the screen. The FPC 8121 may come with or
w/o a touchscreen. Although the touchscreen is chemical
resistant, it is recommended that you spray the liquid cleaner
on a cloth first before wiping the screen. In case your system
comes without the touchscreen, you must follow the same
procedure and not spray any cleaner on the flat panel
directly.
6. Avoid using sharp objects to operate the touchscreen.
Scratches on the touchscreen may cause malfunction or
internal failure to the touchscreen.
7. The flat panel display is not susceptible to shock or vibration.
When assembling the FPC 8121, make sure it is securely
installed.
iv
Safety Precautions
does
not
come
equipped
components.
Make
with
an
sure
the FPC
Advertisement
Table of Contents
