Power Cord/Power Connection; Rear Panel Controls; Water Supply Connection - DENTSPLY BOBCAT Pro Directions For Use Manual

5.6 Rear Panel Controls

•The ON/OFF Control Switch is located on the Rear
Panel of the Cavitron BOBCAT Pro Ultrasonic Scaler.
The POWER INDICATOR is located on the Front Panel
of the Cavitron BOBCAT Pro Ultrasonic Scaler.
(See Section 6.1)
ON/OFF Switch
Section 5: Installation Instructions cont'd

5.7 Power Cord/Power Connection

•Verify the ON/OFF Control Switch located on the rear
panel of the ultrasonic scaler is in the OFF position
before proceeding.
•Plug the detachable AC Cord into the back of the
ultrasonic scaler and into an approved outlet.
5.8 Water Supply Line Connection
•Connect the free end of the ultrasonic scalerʼs water
supply line to the dental water supply line or a Cavitron
DualSelect TM Dispensing System. If your ultrasonic
scalerʼs water supply line is provided with a quick
disconnect, connect the quick disconnect to the dental
water supply line or a Cavitron DualSelect Dispensing
System.
•Inspect all connections to make certain there are
no leaks.
ENGLISH • 5