Table of Contents
Advertisement
4.
Type a password. The password may consist of up to seven characters.
Be very careful when typing your password
because the characters do not appear on the
screen.
5.
Press
. A prompt asks you to retype the password to verify your
first entry.
6.
Retype the password then press
After setting the password, the system automatically sets the Setup
Password parameter to
7.
Press
to exit the System Security screen and return to the main
menu.
8.
Press
to exit the BIOS utility. A dialog box appears asking if you
want to save the CMOS data.
9.
Select
Yes
to save the changes and reboot the system.
10. While rebooting, turn off the system then open the housing.
11. Set JP9 to
1-2
to enable the password function.
The next time you want to enter the BIOS utility, you must key-in your
Setup password.
Changing or Removing the Setup Password
Should you want to change your setup password, do the following:
1.
Enter the BIOS utility and select System Security.
2.
Highlight the Setup Password parameter.
3.
Press
or
to display the password prompt and key-in a new
password.
BIOS Utility
.
Present
.
2-39
Advertisement
Chapters
Table of Contents
