Page 1
16555 108th Ave. • Orland Park, IL 60467 USA 1.888.413.3332 • 708.263.4443 #HM1, Tilt Head #HM1, Tilt Head Specifications: Height ..3 in. / 7.62 cm (body) ~ 5 in. / 12.70 cm (including clamp and knob) Width ............... 2.20 in. / 5.59 cm (body) Depth........
Page 2
Arca Compatible Plate on your camera and create a rail under your lens that will allow proper positioning on the #HM1 Tilt Head. Never let go of your camera and lens until everything is secured and tightened.
Page 3
#A14 Anti-Rotation Holes (sold separately) ** If using an Arca Compatible Clamp to mount the #HM1 it is advisable to install the (2) safety stop screws (included) onto the bottom plate of the #HM1. These (2) small screws are used to prevent accidental slide out.
Page 4
#HM1 Maintenance Check periodically for loose screws and tighten with the included hardware. Oil if necessary with WD40 or a silicone spray. The #HM1 is a precision instrument that should be used only as directed. What's In The Box • (1) #HM1 Tilt Head featuring our #C60 Arca Compatible Clamp •...