16555 108th Ave. • Orland Park, IL 60467 USA 1.888.413.3332 • 708.263.4443 #HM1, Tilt Head Instruction Manual Specifications: Height ..3 in. / 7.62 cm (body) ~ 5 in. / 12.70 cm (including clamp and knob) Width ............... 2.20 in. / 5.59 cm (body) Depth........
Page 2
Arca Compatible Plate on your camera and create a rail under your lens that will allow proper positioning on the #HM1 Tilt Head. Never let go of your camera and lens until everything is secured and tightened.
Page 3
Safety Stop Screw Optional Configuration Do you wish to use the #HM1 Head with an Arca Compatible Plate on your camera rather than your lens plate? The #C60 Top Clamp can be rotated 90° to allow just that configuration. Hardware was included to remove the #C60, adjust the anti-rotation pins, rotate the clamp and reinstall.
Page 4
#HM1 Maintenance Check for loose screws and tighten with the included hardware. Oil if necessary with WD40 or a silicone spray. The #HM1 is a precision instrument that should be used only as directed. ProMediaGear is not responsible for damage caused while using the #HM1 Tilt Head.