Using Your Air Purifier; About The Filter - Levoit True HEPA Vital 100 User Manual

EN
GETTING STARTED (CONT.)
Replace the back cover by lining up the
3.
cover's feet with the matching slots on
the bottom of the housing. [Figure
4. Push the cover closed.
5. Place the air purifier on a hard,
flat surface. Leave 38 cm / 15 in of
clearance to allow air to pass through
the air inlets on the sides. [Figure
Figure 1.3
38 cm /
15 in
38 cm /
15 in
Figure 1.4
8
U S I N G YO U R A I R
P U R I F I E R
General Operation
1.3]
1. Plug in and tap to turn the air purifier
on/off. The fan will start on level I.
2. Optionally, tap to cycle fan speeds
between I, II, and III.
1.4]
Note:
• The indicators are not buttons and
cannot be used to change the fan
speed.
•
The fan speed indicators will light up
when active.
• Fan speed III is the loudest, but cleans
air the quickest.
• For best results, or to address a
specific air quality issue such as
smoke, run the air purifier at high
speed (level III) for 15–20 minutes
before using a lower speed.
• To effectively clean air, keep windows
and doors closed while the air purifier
is on.
Memory Function
When the air purifier is plugged in, it will
remember its previous fan speed setting.
Note: The air purifier will not remember
timers.
USING YOUR PURIFIER (CONT.)
Timer
You can set a timer for 2, 4, or 8 hours.
1. Tap repeatedly to select a time. The
timer will start automatically.
Note:
• The indicators are not buttons and
cannot be used to select a time.
•
The timer indicators will light up blue
when active.
Once the timer has finished, the air
2.
purifier will turn off.
3. To cancel a timer, tap until all timer
indicators are off.
Note:
• You can change the fan speed at any
time while the timer is on.
• The timer will restart if the time
is changed.
A B O U T T H E F I LT E R
The air purifier uses a 3-stage filtration
system to purify air.
A
B
C
A. True HEPA Filter
• Removes at least 99.97% of
airborne particles 0.3 micrometres
(µm) in diameter.
Filters small particles such as
•
smoke, dust, mould spores,
bacteria, viruses, and allergens such
as pollen, dander, and mites.
B. High-Efficiency Activated Carbon
Filter
• Physically adsorbs smoke, odours,
and fumes.
Filters compounds such as
•
formaldehyde, benzene, ammonia,
hydrogen sulphide, and volatile
organic compounds (VOCs).
C. Pre-Filter
• Captures large particles such as
dust, lint, fibres, hair, and pet fur.
• Maximises the filter's life by
protecting it.
EN
9