Setting The Flash - Acer CP-8660 User Manual

Setting the Flash

Set the flash for capturing images. The flash firing mode can be set to suit for the
photographic conditions.
1. Slide the mode switch to [
2. Toggle the
mode.
The table below will help you choose the appropriate flash mode:
Flash mode
[ Blank] Automatic Flash
[ ] Red-eye Reduction
[ ] Forced Flash
[ ] Flash Off
EN-22
].
button to select the desired flash
Description
The flash fires automatically to suit the photographic conditions.
This mode is only available when the camera is set to the
[ ], [P], [ ] and [ ]
Use this mode to reduce the red-eye phenomenon when you
want to capture natural- looking images of people and animals
in low-light conditions.
When the camera mode is [
to suit the brightness of the subject.
When the camera mode is [Tv] and [Av], the flash will always fire.
In this mode, the flash always fires. Use this mode for
photographing under artificial light such as backlighting,
fluorescent lighting, etc.
Use this mode when capturing images using indoor lighting,
for stages and indoor competitions, and when the subject is
too far away for the flash to be effective.
mode.
], [P] and [M], the flash will fire