Setting Image Resolution And Quality - Acer CP-8660 User Manual

Setting Image Resolution and Quality

Resolution and quality settings determine the pixel size (dimension), image file size,
and compression ratio for your images. These settings affect the number of images
that can be stored. As you get to know the camera, it is recommended that you try
each quality and resolution setting to get an appreciation for the effects that these
settings will have on your images.
Higher resolution and higher quality images offer the best photographic results, but
produce large file sizes. Therefore, few images will take up a lot of memory space.
High resolution and quality settings are recommended for printed output and situations
requiring the finest detail. Lower resolution/quality images take up less memory space
and may be quite suitable for sharing images via e-mail, in a report, or on a web page.
To change image resolution or image quality, perform these steps below:
1. Slide the mode switch to [
mode dial to one of the photography modes.
2. Press the MENU button.
[Capture] of the photography menu is
displayed.
3. Select [Size] with the
press the SET button.
4. Select the desired setting with the
buttons, and press the SET button.
5. Select [Quality] with the
press the SET button.
6. Select the desired setting with the
buttons, and press the SET button.
7. To exit from the photography menu, press
the MENU button.
Frame rate of video recording would be different depending on the SD
memory card access speed.
If using a low access speed SD memory card, it influences the frame rate
and recording time.
EN-18
] and set the
/ buttons, and
/
/ buttons, and
/
AE/AWB
Normal