Panorama Mode; Anti-Shake Mode - Acer CP-8660 User Manual

[

] Panorama Mode

This mode is designed to make it easier to take a series of shots then stitch them
together with software to make a single photo. You can capture a photographic
subject that won't fit into a single frame, such as a landscape, and stitch it together
later with a program such as Cool 360 or Photoshop application.
1. Slide the mode switch to [
mode dial to [
2. Shoot the first image.
The next image appears beside the
previous image.
3. Orient the camera so that the second frame
overlaps a small portion of the photographic
subject of the first image and press the shutter
button to capture the next image.
4. Follow the same steps to capture subsequent
images in the sequence.
5. Finish the sequence by pressing the SET
b u t t o n a f t e r t h e l a s t i m a g e h a s b e e n
recorded.
[

] Anti-Shake Mode

The anti-shake function works according to the luminance of the target object. This
function uses special image data processing for getting high sensitivity of CCD. High
sensitivity can use higher shutter speed compared with normal mode, so it reduces
influence of hand shaking. From the resolution point of view, it becomes worse than
normal mode. Maximum size of image becomes 5 mega pixels (2560 x 1920).
1. Slide the mode switch to [
mode dial to [
2. Compose the image, press the shutter button
down halfway, then press it down fully.
] and set the
].
] and set the
].
EN-31