Using The Flash - Acer Digital camera 6.36 Mega pixels User Manual

Using the Flash

The flash is designed to function automatically when lighting conditions warrant the
use of flash. You can take an image using a desired flash mode to suit your
circumstances.
1. Rotate the mode dial to
, or .
2. Press the power switch to turn on the
power.
3. Press the four-way controller (
flash mode changes each time the button
is pressed.
4. Press the button to confirm the setting.
5. Compose your scene and press the
shutter release button.
The camera has four flash modes: Auto, Red-eye, Flash on and Flash off.
The table below will help you to choose the appropriate flash mode:
Flash mode
Auto
Red-eye
Flash on
Flash off
EN-20
, , , ,
). The
Description
The flash fires automatically according to the
photographic conditions.
Use this mode to reduce the red-eye phenomenon when
you want to take natural-looking photographs of people
and animals in low-light conditions.When taking
photographs, the red-eye phenomenon can be reduced
by asking the subject (person) to look at the digital
camera or get as close to the digital camera as possible.
The flash will always fire regardless of the surrounding
brightness.
The flash will not discharge, regardless of the brightness.
Use this mode when taking pictures using indoor lighting,
for stages and indoor competitions, and when the subject
is too far away for the flash to be effective.
Flash Mode Flash Mod lash Mode
Auto Aut uto
OK : OK : OK :