Setting the Date and Time
The date/time needs to be set if/when:
Camera is turned on for the first time.
Camera is turned on after leaving the camera without the battery for an extended
period of time.
When the date and time information is not displayed on the LCD monitor, follow these
steps to set the correct date and time.
1. Slide the mode switch to [
MENU button.
2. Select [Setup2] with the
3. Select [Date/Time] with the
and press the SET button.
The Date/Time setting screen will be
displayed.
4. Select the item's field with the
and adjust the value for the date and time
with the
/
The date and time is set in the order year-
month-day-hour-minute.
The time is displayed in 24-hour format.
5. After confirming all settings are correct, press
the SET button.
The setting will be stored and the screen
will return to the Setup2 menu.
6. To exit from the Setup2 menu, press the
MENU button.
Choosing the Display Language
Choose an On-Screen Display (OSD) language for information to be displayed on the
LCD monitor.
1. Slide the mode switch to [
MENU button.
2. Select [Setup2] with the
3. Select [Language] with the
and press the SET button.
The language setting screen will be
displayed.
4. Select the displayed language with the
buttons and press the SET button.
The setting will be stored.
5. To exit from the Setup2 menu, press the
MENU button.
EN-16
], and press the
button.
/
/
buttons.
], and press the
button.
/
buttons,
buttons
buttons,
/