Table of Contents
Advertisement
Setting the Date and Time
The date/time needs to be set if/when:
Camera is turned on for the first time.
Camera is turned on after leaving the camera without the battery for an
extended period of time.
When the date and time information is not displayed on the LCD monitor, follow
these steps to set the correct date and time.
1. Slide the mode switch to [
the mode dial to [
The setup menu is displayed.
2. Select [Custom] with the
3. Select [Date/Time] with the
buttons, and press the SET button.
The Date/Time setting screen will
be displayed.
4. Select the item's field with the
buttons and adjust the value for the
date and time with the
The date and time is set in the order
year-month-day-hour-minute.
The time is displayed in 24-hours
format.
5. After confirming all settings are correct,
press the SET button.
The setting will be stored and the
screen will return to the setup menu.
] and set
].
/
buttons.
/
/
/
buttons.
2005
01
01
01
01
Adjust
EN-13
Advertisement
Table of Contents
