Figure 20: Basic Overview Of Static Address Parameters For General Network Interface Setup - ION ion4i User Manual

2x2 indoor & outdoor access points
Table of Contents

Advertisement

2x2 Indoor & Outdoor Access Points
Revision: A0-00
10.1.1.1
Static IP configuration
The default IP address of the access point is set to 192.168.1.1. User can change the default IP address with an
unused IP address. Refer Figure 19: Basic overview of the network interface setup configuration screen to switch
protocol and set the protocol to static address.
Refer the figure below to provide the static address parameters:

Figure 20: Basic overview of static address parameters for general network interface setup

40
CONFIDENTIA L

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ion4Ion4e

Table of Contents