2x2 Indoor & Outdoor Access Points
9.2
Reboot Thin AP
Reboot restarts the device from current partition (Primary or Secondary partition) with existing configuration. A
basic overview of the Reboot screen is given below:
Follow the steps given below and reboot the AP:
Callout
Name
1.
Administration
2.
Reboot
3.
Perform Reboot
Figure 17: Basic overview of the reboot screen
Table 9: List of actions to reboot the AP
Description
Click on "Administration" dropdown
Click on "Reboot" option
Click on "Perform Reboot" option. Device will boot from
current partition, and the firmware version present in the
current partition will be in use
CONFIDENTIA L
Revision: A0-00
37