Connect To The Outdoor Access Point; Figure 11: Connect To The Network - ION ion4i User Manual

2x2 Indoor & Outdoor Access Points
6.2.1

Connect to the Outdoor Access Point

Follow the steps mentioned below and connect to the outdoor AP through GUI:
1. Configure a computer with a 1-domain static IP address e.g. 192.168.1.1 and a subnet mask of 255.255.25 5. 0.
2. For help configuring a static IP address on your computer, check the instructions or online help that came
with that computer.\
3. Connect the Ethernet cable to the computer.
4. Connect the other end of the Ethernet cable to the PoE adaptor (Data/In port). Use the unused port (P+D/Out)
of PoE adaptor and connect it to the LAN + PoE port of the device.
5. Device will be powered On.
6. Open a web browser and enter the "AP static IP address" (192.168.1.1) in the address bar.
7. A login screen will appear.

Figure 11: Connect to the network

CONFIDENTIA L
Revision: A0-00
31