2x2 Indoor & Outdoor Access Points
7
Connect to the Thin Mode Access Point and Log In
You can connect to the access point's web management interface to view or change its LAN and wireless access
settings. Refer the procedure mention in "Connect to the Indoor Access Point" and "Connect to the Outdoor Access
Point" section and connect to a thin mode access point.
7.1
Login through GUI
This is the 1
screen of AP GUI. It provides access to the users with valid login credentials only. The login
st
credentials will determine the access rights of the user.
A basic overview of the same is shown below:
Follow the steps given below to login through GUI:
Callout
Name
1.
Web browser
2.
User name
3.
Password
Click on "Login", a successful/authenticated login will take the user to Status Overview screen.
Figure 12: Basic overview of login screen
Table 4: List of actions to login through GUI
Description
Open a web browser and enter the "IP address of the AP" in
the address bar. 192.168.1.1 is the default IP address
Enter the valid "User ID"
Enter the valid "Password"
CONFIDENTIA L
Revision: A0-00
32